Difference between revisions of "SSD"

From CNM Wiki
Jump to: navigation, search
(Created page with "SSD (hereinafter, the ''solid-state drive'') is a solid-state storage device that uses integrated circuit assemblies as memory to store data persistently. SSD technology p...")
 
 
Line 8: Line 8:
 
==Hard-disk drive vs Solid-state drive==
 
==Hard-disk drive vs Solid-state drive==
 
An HDD might be the right choice if:
 
An HDD might be the right choice if:
*You need lots of storage capacity, up to 10TB  
+
*You need lots of [[storage capacity]], up to 10TB  
 
*Don’t want to spend much money
 
*Don’t want to spend much money
 
*Don’t care too much about how fast a computer boots up or opens programs - then get a hard drive (HDD).
 
*Don’t care too much about how fast a computer boots up or opens programs - then get a hard drive (HDD).
Line 14: Line 14:
 
An SSD might be the right choice if:
 
An SSD might be the right choice if:
 
*You are willing to pay for faster performance
 
*You are willing to pay for faster performance
*Don’t mind limited storage capacity or can work around that (though consumer SSD now go up to 4TB and enterprise run as high as 60TB)
+
*Don’t mind limited [[storage capacity]] or can work around that (though consumer SSD now go up to 4TB and enterprise run as high as 60TB)
  
 
==Architecture and function==
 
==Architecture and function==

Latest revision as of 01:02, 29 December 2020

SSD (hereinafter, the solid-state drive) is a solid-state storage device that uses integrated circuit assemblies as memory to store data persistently. SSD technology primarily uses electronic interfaces compatible with traditional block input/output (I/O) hard disk drives (HDDs), which permit simple replacements in common applications. New I/O interfaces like SATA Express and M.2 have been designed to address specific requirements of the SSD technology.

SSDs have no moving mechanical components. This distinguishes them from traditional electromechanical magnetic disks such as hard disk drives (HDDs) or floppy disks, which contain spinning disks and movable read/write heads. Compared with electromechanical disks, SSDs are typically more resistant to physical shock, run silently, and have lower access time and lower latency.

Curriculum

Main wikipage: CNM Cloud requirements

Hard-disk drive vs Solid-state drive

An HDD might be the right choice if:

  • You need lots of storage capacity, up to 10TB
  • Don’t want to spend much money
  • Don’t care too much about how fast a computer boots up or opens programs - then get a hard drive (HDD).

An SSD might be the right choice if:

  • You are willing to pay for faster performance
  • Don’t mind limited storage capacity or can work around that (though consumer SSD now go up to 4TB and enterprise run as high as 60TB)

Architecture and function

The key components of an SSD are the controller and the memory to store the data. The primary memory component in an SSD was traditionally DRAM volatile memory, but since 2009 it is more commonly NAND flash non-volatile memory.

Controller

Every SSD includes a controller that incorporates the electronics that bridge the NAND memory components to the host computer. The controller is an embedded processor that executes firmware-level code and is one of the most important factors of SSD performance. Some of the functions performed by the controller include:

Memory

Flash-memory-based

Most SSD manufacturers use non-volatile NAND flash memory in the construction of their SSDs because of the lower cost compared with DRAM and the ability to retain the data without a constant power supply, ensuring data persistence through sudden power outages. Flash memory SSDs are slower than DRAM solutions, and some early designs were even slower than HDDs after continued use. Flash memory-based solutions are typically packaged in standard disk drive form factors (1.8-, 2.5-, and 3.5-inch), but also in smaller unique and compact layouts made possible by the small size of flash memory.

DRAM-based=

SSDs based on volatile memory such as DRAM are characterized by very fast data access, generally less than 10 microseconds, and are used primarily to accelerate applications that would otherwise be held back by the latency of flash SSDs or traditional HDDs. DRAM-based SSDs usually incorporate either an internal battery or an external AC/DC adapter and backup storage systems to ensure data persistence while no power is being supplied to the drive from external sources. If power is lost, the battery provides power while all information is copied from random access memory (RAM) to back-up storage. When the power is restored, the information is copied back to the RAM from the back-up storage, and the SSD resumes normal operation (similar to the hibernate function used in modern operating systems).

Other

Some SSDs, called NVDIMM or Hyper DIMM devices, use both DRAM and flash memory. When the power goes down, the SSD copies all the data from its DRAM to flash; when the power comes back up, the SSD copies all the data from its flash to its DRAM. In a somewhat similar way, some SSDs use form factors and buses actually designed for DIMM modules, while using only flash memory and making it appear as if it were DRAM. Such SSDs are usually known as UltraDIMM devices.

Cache or buffer

A flash-based SSD typically use a small amount of DRAM as a volatile cache, similar to the buffers in hard disk drives. A directory of block placement and wear leveling data is also kept in the cache while the drive is operating. One SSD controller manufacturer, SandForce, does not use an external DRAM cache on their designs but still achieves high performance. Such an elimination of the external DRAM reduces the power consumption and enables further size reduction of SSDs.

Battery or supercapacitor

Another component in higher-performing SSDs is a capacitor or some form of battery, which are necessary to maintain data integrity so the data in the cache can be flushed to the drive when power is lost; some may even hold power long enough to maintain data in the cache until power is resumed. In the case of MLC flash memory, a problem called lower page corruption can occur when MLC flash memory loses power while programming an upper page. The result is that data written previously and presumed safe can be corrupted if the memory is not supported by a supercapacitor in the event of a sudden power loss. This problem does not exist with SLC flash memory.

Host interface

Apart from associated connectors, the host interface is not physically a component of the SSD, but it is a key part of the drive. The interface is usually incorporated into the above-discussed controller, and is many times one of the interfaces found in HDDs.