Difference between revisions of "CDL Vehicle Inspection Test"

From CNM Wiki
Jump to: navigation, search
(Steering (11.2.1))
(External Inspection (All Vehicles; 11.2))
Line 107: Line 107:
 
===Steering (11.2.1)===
 
===Steering (11.2.1)===
 
:;Steering Box/Hoses
 
:;Steering Box/Hoses
Check that the steering box is securely mounted  
+
Check that the steering box is securely mounted and not leaking. Look for any missing nuts and/or, bolts.
and not leaking. Look for any missing nuts and/or ,  
+
Check for power steering fluid leaks or damage to power steering hoses.
bolts.
 
Check for power steering fluid leaks or damage to  
 
power steering hoses.
 
 
:;Steering Linkage
 
:;Steering Linkage
See that connecting links, arms, and rods from the  
+
See that connecting links, arms, and rods from the steering box to the wheel are not worn or cracked.
steering box to the wheel are not worn or cracked.
+
Check that joints and sockets are not worn or loose and that there are no missing nuts, bolts, or cotter keys.
Check that joints and sockets are not worn or loose  
 
and that there are no missing nuts, bolts, or cotter  
 
keys.
 
  
 
===Suspension (11.2.2)===
 
===Suspension (11.2.2)===
Springs/Air/Torque
+
:;Springs/Air/Torque
Look for missing, shifted, cracked, or broken leaf  
+
Look for missing, shifted, cracked, or broken leaf springs.
springs.
 
 
Look for broken or distorted coil springs.
 
Look for broken or distorted coil springs.
If vehicle is equipped with torsion bars, torque  
+
If vehicle is equipped with torsion bars, torque arms, or other types of suspension components, check that they are not damaged and are mounted securely.
arms, or other types of suspension components,  
+
Air ride suspension should be checked for damage and leaks.
check that they are not damaged and are mounted  
 
securely.
 
Air ride suspension should be checked for damage  
 
and leaks.
 
 
Mounts
 
Mounts
Look for cracked or broken spring hangers,
+
Look for cracked or broken spring hangers, missing or damaged bushings, and broken, loose, or missing bolts, u-bolts or other axle mounting parts. (The mounts should be checked at each point where they are secured to the vehicle frame and axle[s]).
missing or damaged bushings, and broken, loose,  
+
:;Shock Absorbers
or missing bolts, u-bolts or other axle mounting  
+
See that shock absorbers are secure and that there are no leaks.
parts. (The mounts should be checked at each  
+
Note: Be prepared to perform the same suspension components inspection on every axle (power unit and trailer, if equipped).
point where they are secured to the vehicle frame  
+
 
and axle[s]).
 
Shock Absorbers
 
See that shock absorbers are secure and that  
 
there are no leaks.
 
Note: Be prepared to perform the same  
 
suspension components inspection on every axle  
 
(power unit and trailer, if equipped).
 
 
===Brakes (11.2.3)===
 
===Brakes (11.2.3)===
Slack Adjustors and Pushrods
+
:;Slack Adjustors and Pushrods
 
Look for broken, loose, or missing parts.
 
Look for broken, loose, or missing parts.
For manual slack adjustors, the brake pushrod  
+
For manual slack adjustors, the brake pushrod should not move more than one inch (with the brakes released) when pulled by hand.
should not move more than one inch (with the  
+
:;Brake Chambers
brakes released) when pulled by hand.
+
See that brake chambers are not leaking, cracked, or dented and are mounted securely. There are no loose or missing clamps.
Brake Chambers
+
:;Brake Hoses/Lines
See that brake chambers are not leaking, cracked,  
+
Look for cracked, worn, or leaking hoses, lines, and couplings.
or dented and are mounted securely. There are no  
+
:;Drum Brake
loose or missing clamps.
+
Check for cracks, dents, or holes. Also check for loose or missing bolts.
Brake Hoses/Lines
 
Look for cracked, worn, or leaking hoses, lines,  
 
and couplings.
 
Drum Brake
 
Check for cracks, dents, or holes. Also check for  
 
loose or missing bolts.
 
 
Check for contaminates such debris or oil/grease.  
 
Check for contaminates such debris or oil/grease.  
Brake linings (where visible) should not be worn  
+
Brake linings (where visible) should not be worn dangerously thin.
dangerously thin.
+
:;Brake Linings
Brake Linings
+
On some brake drums, there are openings where the brake linings can be seen from outside the drum. For this type of drum, check that a visible amount of brake lining is showing.
On some brake drums, there are openings where  
+
Note: Be prepared to perform the same brake components inspection on every axle (power unit and trailer, if equipped).
the brake linings can be seen from outside the  
 
drum. For this type of drum, check that a visible  
 
amount of brake lining is showing.
 
Note: Be prepared to perform the same brake  
 
components inspection on every axle (power unit  
 
and trailer, if equipped).
 
  
 
===Wheels (11.2.4)===
 
===Wheels (11.2.4)===
Rims
+
:;Rims
Check for damaged or bent rims. Rims cannot  
+
Check for damaged or bent rims. Rims cannot have welding repairs. Check rims for rust trails that may indicate the rim is loose on the wheel.
have welding repairs. Check rims for rust trails  
+
:;Tires
that may indicate the rim is loose on the wheel.
+
The following items must be inspected on every tire:
Tires
+
Tread depth: Check for minimum tread depth (4/32 on steering axle tires, 2/32 on all other tires).
The following items must be inspected on every  
+
Tire condition: Check that tread is evenly worn and look for cuts or other damage to tread or sidewalls.  
tire:
+
Also, make sure that valve caps and stems are not missing, broken, or damaged.
Tread depth: Check for minimum tread depth (4/32  
+
Tire inflation: Check for proper inflation by using a tire gauge. Note: You will not get credit if you simply kick the tires or use a mallet to check for proper inflation.
on steering axle tires, 2/32 on all other tires).
+
:;Hub Oil Seals/Axle Seals
Tire condition: Check that tread is evenly worn and  
+
See that hub oil/grease seals and axle seals are not leaking and, if wheel has a sight glass, oil level is adequate.
look for cuts or other damage to tread or sidewalls.  
+
:;Lug Nuts
Also, make sure that valve caps and stems are not  
+
Check that all lug nuts are present, free of cracks and distortions, and show no signs of looseness such as rust trails or shiny threads.
missing, broken, or damaged.
 
Tire inflation: Check for proper inflation by using a  
 
tire gauge. Note: You will not get credit if you simply  
 
kick the tires or use a mallet to check for proper  
 
inflation.
 
Hub Oil Seals/Axle Seals
 
See that hub oil/grease seals and axle seals are not  
 
leaking and, if wheel has a sight glass, oil level is  
 
adequate.
 
Lug Nuts
 
Check that all lug nuts are present, free of cracks  
 
and distortions, and show no signs of looseness  
 
such as rust trails or shiny threads.
 
 
Make sure all bolt holes are not cracked or distorted.
 
Make sure all bolt holes are not cracked or distorted.
Spacers or Budd Spacing
+
:;Spacers or Budd Spacing
 
If equipped, check that spacers are not bent,  
 
If equipped, check that spacers are not bent,  
damaged, or rusted through; and are centered with  
+
damaged, or rusted through; and are centered with dual tires evenly separated.
dual tires evenly separated..
+
Check the space between the tires for debris and/or foreign objects.
Check the space between the tires for debris  
+
Note: Be prepared to perform the same wheel inspection on every axle (power unit and trailer, if equipped).
and/or foreign objects.
+
 
Note: Be prepared to perform the same wheel  
 
inspection on every axle (power unit and trailer, if  
 
equipped).
 
 
===Side of Vehicle (11.2.5)===
 
===Side of Vehicle (11.2.5)===
Door(s)/Mirror(s)
+
:;Door(s)/Mirror(s)
Check that door(s) are not damaged and that they  
+
Check that door(s) are not damaged and that they open and close properly from the outside.  
open and close properly from the outside.  
 
 
Hinges should be secure with seals intact.
 
Hinges should be secure with seals intact.
Check that mirror(s) and mirror brackets are not  
+
Check that mirror(s) and mirror brackets are not damaged and are mounted securely with no loose fittings.
damaged and are mounted securely with no loose  
+
:;Fuel Tank
fittings.
+
Check that tank(s) are secure, cap(s) are tight, and that there are no leaks from tank(s) or lines.
Fuel Tank
+
:;Drive Shaft
Check that tank(s) are secure, cap(s) are tight, and  
 
that there are no leaks from tank(s) or lines.
 
Drive Shaft
 
 
See that drive shaft is not bent or cracked.
 
See that drive shaft is not bent or cracked.
Couplings should be secure and free of foreign  
+
Couplings should be secure and free of foreign objects.
objects.
+
:;Exhaust System
Exhaust System
+
Check system for damage and signs of leaks such as rust or carbon soot. Exhaust system should not have cracks, holes or severe dents
Check system for damage and signs of leaks such  
+
System should be connected tightly and mounted securely.
as rust or carbon soot. Exhaust system should not  
+
:;Frame
have cracks, holes or severe dents
+
Look for cracks, broken welds, holes or other damage to the longitudinal frame members, cross members, box, and floor.
System should be connected tightly and mounted  
+
 
securely.
 
Frame
 
Look for cracks, broken welds, holes or other  
 
damage to the longitudinal frame members, cross  
 
members, box, and floor.
 
 
===Rear of Vehicle (11.2.6)===
 
===Rear of Vehicle (11.2.6)===
Splash Guards
+
:;Splash Guards
If equipped, check that splash guards or mud flaps  
+
If equipped, check that splash guards or mud flaps are not damaged and are mounted securely.
are not damaged and are mounted securely.
+
:;Doors/Ties/Lifts
Doors/Ties/Lifts
+
Check that doors and hinges are not damaged and that they open, close, and latch properly from the outside, if equipped.
Check that doors and hinges are not damaged and  
+
Ties, straps, chains, and binders must also be secure.
that they open, close, and latch properly from the  
+
If equipped with a cargo lift, look for leaking, damaged or missing parts and explain how it should be checked for correct operation.
outside, if equipped.
 
Ties, straps, chains, and binders must also be  
 
secure.
 
If equipped with a cargo lift, look for leaking,  
 
damaged or missing parts and explain how it  
 
should be checked for correct operation.
 
 
Lift must be fully retracted and latched securely.
 
Lift must be fully retracted and latched securely.
 +
 
===Tractor/Coupling (11.2.7)===
 
===Tractor/Coupling (11.2.7)===
Air/Electric Lines
+
:;Air/Electric Lines
Listen for air leaks. Check that air hoses and  
+
Listen for air leaks. Check that air hoses and electrical lines are not cut, chafed, spliced, or worn (steel braid should not show through).
electrical lines are not cut, chafed, spliced, or worn  
+
Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.
(steel braid should not show through).
+
:;Catwalk/Steps
Make sure air and electrical lines are not tangled,  
+
Check that the catwalk is solid, clear of objects, and securely bolted to tractor frame.
pinched, or dragging against tractor parts.
+
Check that steps leading to the cab entry and catwalk (if equipped) are solid, clear of objects, and securely bolted to tractor frame.
Catwalk/Steps
+
:;Mounting Bolts
Check that the catwalk is solid, clear of objects,  
+
Look for loose or missing mounting brackets, clamps, bolts, or nuts. Both the fifth wheel and the slide mounting must be solidly attached.
and securely bolted to tractor frame.
+
Check for loose or missing mounting bolts and for broken welds for pintle hook or other type of hitch mount, and tongue/draw-bar assembly to ensure that they are solidly attached in place.
Check that steps leading to the cab entry and  
+
On other types of coupling systems (i.e., ball hitch, pintle hook, etc.), inspect all coupling components and mounting brackets for missing or broken parts.
catwalk (if equipped) are solid, clear of objects,  
+
:;Hitch Release Lever
and securely bolted to tractor frame.
+
Check to see that the hitch release lever is in place and is secure.
Mounting Bolts
+
:;Locking Jaws
Look for loose or missing mounting brackets,  
+
Look into fifth wheel gap and check that locking jaws are fully closed around the kingpin.
clamps, bolts, or nuts. Both the fifth wheel and the  
+
On other types of coupling systems (i.e., ball hitch, pintle hook, etc.), inspect the locking mechanism for missing or broken parts and make sure it is locked securely. If present, safety cables or chains must be secure and free of kinks and excessive slack.
slide mounting must be solidly attached.
+
:;5th Wheel Skid Plate
Check for loose or missing mounting bolts and for  
+
Check for proper lubrication and that 5th wheel skid plate is securely mounted to the platform and that all bolts and pins are secure and not missing.
broken welds for pintle hook or other type of hitch  
+
:;Platform (Fifth Wheel)
mount, and tongue/draw-bar assembly to ensure  
+
Check for cracks or breaks in the platform structure which supports the fifth wheel skid plate.
that they are solidly attached in place.
+
:;Release Arm (Fifth Wheel)
On other types of coupling systems (i.e., ball hitch,  
+
If equipped, make sure the release arm is in the engaged position and the safety latch is in place.
pintle hook, etc.), inspect all coupling components  
+
:;Kingpin/Apron/Gap
and mounting brackets for missing or broken parts.
+
Explain that locking jaws holds kingpin in place and that the kingpin is not bent or damaged.
Hitch Release Lever
+
Make sure the visible part of the apron is not bent, cracked, or broken.
Check to see that the hitch release lever is in place  
+
Check that the trailer is lying flat on the fifth wheel skid plate (no gap).
and is secure.
 
Locking Jaws
 
Look into fifth wheel gap and check that locking  
 
jaws are fully closed around the kingpin.
 
On other types of coupling systems (i.e., ball hitch,  
 
pintle hook, etc.), inspect the locking mechanism  
 
for missing or broken parts and make sure it is  
 
locked securely. If present, safety cables or chains  
 
must be secure and free of kinks and excessive  
 
slack.
 
5
 
th Wheel Skid Plate
 
Check for proper lubrication and that 5th wheel skid  
 
plate is securely mounted to the platform and that  
 
all bolts and pins are secure and not missing.
 
Platform (Fifth Wheel)
 
Check for cracks or breaks in the platform structure  
 
which supports the fifth wheel skid plate.
 
Release Arm (Fifth Wheel)
 
If equipped, make sure the release arm is in the  
 
engaged position and the safety latch is in place.
 
Kingpin/Apron/Gap
 
Explain that locking jaws holds kingpin in place  
 
and that the kingpin is not bent or damaged
 
Make sure the visible part of the apron is not bent,  
 
cracked, or broken.
 
Check that the trailer is lying flat on the fifth wheel  
 
skid plate (no gap).
 
 
Check for kingpin lock.
 
Check for kingpin lock.
Locking Pins (Fifth Wheel)
+
:;Locking Pins (Fifth Wheel)
If equipped, look for loose or missing pins in the  
+
If equipped, look for loose or missing pins in the slide mechanism of the sliding fifth wheel. If air powered, check for leaks.
slide mechanism of the sliding fifth wheel. If air  
 
powered, check for leaks.
 
 
Make sure locking pins are fully engaged.
 
Make sure locking pins are fully engaged.
Check that the fifth wheel is positioned properly so  
+
Check that the fifth wheel is positioned properly so that the tractor frame will clear the landing gear during turns.
that the tractor frame will clear the landing gear  
+
:;Sliding Pintle
during turns.
+
::Check the sliding pintle hook for excessive wear and to ensure it is secure with no loose or missing nuts or bolts and cotter pin is in place.
Sliding Pintle
+
:;Tongue or Draw-bar
Check the sliding pintle hook for excessive wear  
+
::*Check that the tongue/draw-bar is not bent or twisted and checks for broken welds and stress cracks.
and to ensure it is secure with no loose or missing  
+
::*Check that the tongue/draw-bar eye is not worn excessively.
nuts or bolts and cotter pin is in place.
+
:;Tongue Storage Area
Tongue or Draw-bar
+
::*Check that the storage area is solid and secured to the tongue.
Check that the tongue/draw-bar is not bent or  
+
::*Check that cargo in the storage area i.e. chains, binders, etc. are secure.
twisted and checks for broken welds and stress  
+
 
cracks.
 
Check that the tongue/draw-bar eye is not worn  
 
excessively.
 
Tongue Storage Area
 
Check that the storage area is solid and secured to  
 
the tongue.
 
Check that cargo in the storage area i.e. chains,  
 
binders, etc. are secure.
 
 
==School Bus Only (11.3)==
 
==School Bus Only (11.3)==
 
Emergency Equipment
 
Emergency Equipment

Revision as of 18:57, 14 July 2021

This CDL Vehicle Inspection Test represents the July 2017 version of the Section 11 "Vehicle Inspection Test" of the Commercial Driver's License Manual adopted by the state of Virginia. The manual was developed for the 2005 CDL Testing System.


Section 11 introduction

Purpose

During the Vehicle inspection, you must show that the vehicle is safe to drive. You will have to walk around the vehicle, name and point to/ touch each item and explain to the examiner what you are checking and why.

Restrictions

Any vehicle that has components marked or labeled cannot be used for the Vehicle Inspection test.

Scope

This Section covers:
  • Internal Inspection
  • External Inspection

All Vehicles (11.1)

Study the following vehicle parts for the type of vehicle you will be using during the CDL skills tests. You should be able to identify each part and tell the examiner what you are looking for or inspecting.

Engine Compartment (Engine Off; 11.1.1)

Leaks/Hoses
  • Look for puddles on the ground.
  • Look for dripping fluids on underside of engine and transmission.
  • Inspect hoses for condition and leaks.
Oil Level
  • Check oil level when engine is off.
  • Indicate where dipstick is located.
  • Check that the oil level is within safe operating range. Level must be above refill mark.
Coolant Level
Looks at sight glass on radiator or coolant reservoir; adequate level will show in sight glass. If no sight glass is available, you must describe what s/he would look for after removing radiator cap.
Power Steering Fluid
Checks the dipstick and sees where the fluid level is relative to the refill mark or checks sight glass. Level must be above refill mark.
Engine Compartment Belts
Check the following belts for snugness (1/2 to 3/4 inch play at center of belt), cracks, frays, loose fibers or signs of wear:
  • Power steering belt.
  • Water pump belt.
  • Alternator belt.
  • Air compressor belt.
Note: If any of the components listed above are not belt driven, you must:
  • Tell the examiner which component(s) are not belt driven.
  • Make sure component(s) are operating properly, are not damaged or leaking, and are mounted securely.
Safe Start
  • Place gearshift lever in neutral (or park, for automatic transmissions).
  • Depress clutch before attempting to start the vehicle.
  • Start the vehicle and keep clutch depressed until engine reaches idling speed.
  • Then release clutch slowly.

Cab Check/Engine Start (11.1.2)

Oil Pressure Gauge
Make sure oil pressure gauge is working. Check that pressure gauge shows increasing or normal oil pressure or that the warning light goes off. If equipped, oil temperature gauge should begin a gradual rise to the normal operating range.
Temperature Gauge
Make sure the temperature gauge is working. Temperature should begin to climb to the normal operating range or temperature light should be off.
Air Gauge
Check that the air gauge is working properly and that the air compressor builds the air pressure to governor cut-out at approximately 120-140 psi or as specified by manufacturer.
Ammeter/Voltmeter
Check that gauges show alternator and/or generator is charging or that warning light is off.
Mirrors and Windshield
  • Mirrors should be clean and adjusted properly from the inside.
  • Windshield should be clean with no illegal stickers, no obstructions, or damage to the glass.
Emergency Equipment
  • Check for spare electrical fuses.
  • Check for three red reflective triangles and 6 fusees or 3 liquid burning flares.
  • Check that the fire extinguisher is properly charged and securely mounted.
Note: If the vehicle is not equipped with electrical fuses, you must mention this to the examiner.
Wipers/Washers
Check that wiper arms and blades are secure, not damaged, and operate smoothly. If equipped, windshield washers must operate correctly.
Lights/Reflectors/Reflector Tape Condition (Sides & Rear)
Test that dash indicators work when corresponding lights are turned on:
  • Left turn signal.
  • Right turn signal.
  • Four-way emergency flashers.
  • High beam headlight.
  • Anti-lock Braking System (ABS) indicator.
Check that all external lights and reflective equipment are clean and functional and none or broken or missing. Light and reflector checks include verification of correct color:
  • Clearance lights (red on rear, amber elsewhere).
  • Headlights (high and low beams).
  • Taillights.
  • Backing lights.
  • Turn signals.
  • Four-way flashers.
  • Brake lights.
  • Red reflectors (on rear) and amber reflectors (elsewhere).
  • Reflector tape condition
Note: Checks of brake, turn signal and four-way flasher functions must be done separately.
Horn
Check that air horn and/or electric horn work.
Heater/Defroster
Test that the heater and defroster work.
Parking Brake Check
  • With air pressure built to governor cutout and the parking brake engaged (trailer brakes released on combination vehicles), check that the parking brake will hold vehicle by gently trying to pull forward with parking brake on.
  • With air pressure built to governor cutout, the parking brake released and the trailer parking brake engaged (combination vehicles only), check that the trailer parking brake will hold vehicle by gently trying to pull forward with the trailer parking brake on.
Hydraulic Brake Check
  • Pump the brake pedal three times, then hold it down for five seconds. The brake pedal should not move (depress) during the five seconds.
  • If equipped with a hydraulic brake reserve (back-up) system, with the key off, depress the brake pedal and listen for the sound of the reserve system electric motor.
  • Check that the warning buzzer or light is off.
Air Brake Check (Air Brake Equipped Vehicles Only)
Failure to perform all three components of the air brake check correctly will result in an automatic failure of the vehicle inspection test. Air brake safety devices vary. However, this procedure is designed to see that any safety device operates correctly as air pressure drops from normal to a low air condition. For safety purposes, in areas where an incline is present, you will use wheel chocks during the air brake check. The proper procedures for inspecting the air brake system are as follows:
  1. With the air pressure built up to governor cutoff (120 – 140 psi), shut off the engine leaving the key in the “on” or “battery charge” position, chock your wheels if necessary, release the parking brake (all vehicles), and the tractor protection valve (combination vehicle) and fully apply the foot brake. Hold the foot brake for one minute. Check the air gauge to see if the air pressure drops more than three pounds in one minute (single vehicle) or four pounds in one minute (combination vehicle).
  2. Begin fanning off the air pressure by rapidly applying and releasing the foot brake. Low air warning devices (buzzer, light, flag) should activate before air pressure drops below 55 psi or level specified by the manufacturer.
  3. Continue to fan off the air pressure. At approximately 40 psi on a tractor-trailer combination vehicle (or level specified by the manufacturer), the tractor protection valve and parking brake valve should close (pop out). On other combination vehicle types and single vehicle types, the parking brake valve should close (pop out).
Service Brake Check
You will be required to check the application of air or hydraulic service brakes. This procedure is designed to determine that the brakes are working correctly and that the vehicle does not pull to one side or the other. Pull forward at 5 mph, apply the service brake and stop. Check to see that the vehicle does not pull to either side and that it stops when brake is applied.
Safety Belt
Check that the safety belt is securely mounted, adjusts, latches properly and is not ripped or frayed.

External Inspection (All Vehicles; 11.2)

Steering (11.2.1)

Steering Box/Hoses

Check that the steering box is securely mounted and not leaking. Look for any missing nuts and/or, bolts. Check for power steering fluid leaks or damage to power steering hoses.

Steering Linkage

See that connecting links, arms, and rods from the steering box to the wheel are not worn or cracked. Check that joints and sockets are not worn or loose and that there are no missing nuts, bolts, or cotter keys.

Suspension (11.2.2)

Springs/Air/Torque

Look for missing, shifted, cracked, or broken leaf springs. Look for broken or distorted coil springs. If vehicle is equipped with torsion bars, torque arms, or other types of suspension components, check that they are not damaged and are mounted securely. Air ride suspension should be checked for damage and leaks. Mounts Look for cracked or broken spring hangers, missing or damaged bushings, and broken, loose, or missing bolts, u-bolts or other axle mounting parts. (The mounts should be checked at each point where they are secured to the vehicle frame and axle[s]).

Shock Absorbers

See that shock absorbers are secure and that there are no leaks. Note: Be prepared to perform the same suspension components inspection on every axle (power unit and trailer, if equipped).

Brakes (11.2.3)

Slack Adjustors and Pushrods

Look for broken, loose, or missing parts. For manual slack adjustors, the brake pushrod should not move more than one inch (with the brakes released) when pulled by hand.

Brake Chambers

See that brake chambers are not leaking, cracked, or dented and are mounted securely. There are no loose or missing clamps.

Brake Hoses/Lines

Look for cracked, worn, or leaking hoses, lines, and couplings.

Drum Brake

Check for cracks, dents, or holes. Also check for loose or missing bolts. Check for contaminates such debris or oil/grease. Brake linings (where visible) should not be worn dangerously thin.

Brake Linings

On some brake drums, there are openings where the brake linings can be seen from outside the drum. For this type of drum, check that a visible amount of brake lining is showing. Note: Be prepared to perform the same brake components inspection on every axle (power unit and trailer, if equipped).

Wheels (11.2.4)

Rims

Check for damaged or bent rims. Rims cannot have welding repairs. Check rims for rust trails that may indicate the rim is loose on the wheel.

Tires

The following items must be inspected on every tire: Tread depth: Check for minimum tread depth (4/32 on steering axle tires, 2/32 on all other tires). Tire condition: Check that tread is evenly worn and look for cuts or other damage to tread or sidewalls. Also, make sure that valve caps and stems are not missing, broken, or damaged. Tire inflation: Check for proper inflation by using a tire gauge. Note: You will not get credit if you simply kick the tires or use a mallet to check for proper inflation.

Hub Oil Seals/Axle Seals

See that hub oil/grease seals and axle seals are not leaking and, if wheel has a sight glass, oil level is adequate.

Lug Nuts

Check that all lug nuts are present, free of cracks and distortions, and show no signs of looseness such as rust trails or shiny threads. Make sure all bolt holes are not cracked or distorted.

Spacers or Budd Spacing

If equipped, check that spacers are not bent, damaged, or rusted through; and are centered with dual tires evenly separated. Check the space between the tires for debris and/or foreign objects. Note: Be prepared to perform the same wheel inspection on every axle (power unit and trailer, if equipped).

Side of Vehicle (11.2.5)

Door(s)/Mirror(s)

Check that door(s) are not damaged and that they open and close properly from the outside. Hinges should be secure with seals intact. Check that mirror(s) and mirror brackets are not damaged and are mounted securely with no loose fittings.

Fuel Tank

Check that tank(s) are secure, cap(s) are tight, and that there are no leaks from tank(s) or lines.

Drive Shaft

See that drive shaft is not bent or cracked. Couplings should be secure and free of foreign objects.

Exhaust System

Check system for damage and signs of leaks such as rust or carbon soot. Exhaust system should not have cracks, holes or severe dents System should be connected tightly and mounted securely.

Frame

Look for cracks, broken welds, holes or other damage to the longitudinal frame members, cross members, box, and floor.

Rear of Vehicle (11.2.6)

Splash Guards

If equipped, check that splash guards or mud flaps are not damaged and are mounted securely.

Doors/Ties/Lifts

Check that doors and hinges are not damaged and that they open, close, and latch properly from the outside, if equipped. Ties, straps, chains, and binders must also be secure. If equipped with a cargo lift, look for leaking, damaged or missing parts and explain how it should be checked for correct operation. Lift must be fully retracted and latched securely.

Tractor/Coupling (11.2.7)

Air/Electric Lines

Listen for air leaks. Check that air hoses and electrical lines are not cut, chafed, spliced, or worn (steel braid should not show through). Make sure air and electrical lines are not tangled, pinched, or dragging against tractor parts.

Catwalk/Steps

Check that the catwalk is solid, clear of objects, and securely bolted to tractor frame. Check that steps leading to the cab entry and catwalk (if equipped) are solid, clear of objects, and securely bolted to tractor frame.

Mounting Bolts

Look for loose or missing mounting brackets, clamps, bolts, or nuts. Both the fifth wheel and the slide mounting must be solidly attached. Check for loose or missing mounting bolts and for broken welds for pintle hook or other type of hitch mount, and tongue/draw-bar assembly to ensure that they are solidly attached in place. On other types of coupling systems (i.e., ball hitch, pintle hook, etc.), inspect all coupling components and mounting brackets for missing or broken parts.

Hitch Release Lever

Check to see that the hitch release lever is in place and is secure.

Locking Jaws

Look into fifth wheel gap and check that locking jaws are fully closed around the kingpin. On other types of coupling systems (i.e., ball hitch, pintle hook, etc.), inspect the locking mechanism for missing or broken parts and make sure it is locked securely. If present, safety cables or chains must be secure and free of kinks and excessive slack.

5th Wheel Skid Plate

Check for proper lubrication and that 5th wheel skid plate is securely mounted to the platform and that all bolts and pins are secure and not missing.

Platform (Fifth Wheel)

Check for cracks or breaks in the platform structure which supports the fifth wheel skid plate.

Release Arm (Fifth Wheel)

If equipped, make sure the release arm is in the engaged position and the safety latch is in place.

Kingpin/Apron/Gap

Explain that locking jaws holds kingpin in place and that the kingpin is not bent or damaged. Make sure the visible part of the apron is not bent, cracked, or broken. Check that the trailer is lying flat on the fifth wheel skid plate (no gap). Check for kingpin lock.

Locking Pins (Fifth Wheel)

If equipped, look for loose or missing pins in the slide mechanism of the sliding fifth wheel. If air powered, check for leaks. Make sure locking pins are fully engaged. Check that the fifth wheel is positioned properly so that the tractor frame will clear the landing gear during turns.

Sliding Pintle
Check the sliding pintle hook for excessive wear and to ensure it is secure with no loose or missing nuts or bolts and cotter pin is in place.
Tongue or Draw-bar
  • Check that the tongue/draw-bar is not bent or twisted and checks for broken welds and stress cracks.
  • Check that the tongue/draw-bar eye is not worn excessively.
Tongue Storage Area
  • Check that the storage area is solid and secured to the tongue.
  • Check that cargo in the storage area i.e. chains, binders, etc. are secure.

School Bus Only (11.3)

Emergency Equipment In addition to checking for spare electrical fuses (if equipped), three red reflective triangles, 6 fusees or 3 liquid burning flares and a properly charged and rated fire extinguisher, school bus drivers must also inspect the following emergency equipment: Emergency Kit Body Fluid Cleanup Kit Lighting Indicators In addition to checking the lighting indicators listed in Section 10.2 of this manual, school bus drivers must also check the following lighting indicators (internal panel lights): Alternately flashing amber lights indicator, if equipped. Alternately flashing red lights indicator. Strobe light indicator, if equipped. Lights/Reflectors In addition to checking the lights and reflective devices listed in Section 10.2 of this manual, school bus drivers must also check the following (external) lights and reflectors: Strobe light, if equipped is operational and is not broken. Stop arm light, if equipped. Alternately flashing amber lights, if equipped are operational and not broken. Alternately flashing red lights, on both the front and back of the vehicle are operational and not broken.. Student Mirrors In addition to checking the external mirrors, school bus drivers must also check the internal and external mirrors used for observing students: Check for proper adjustment. Checks that all internal and external mirrors and mirror brackets are not damaged and are mounted securely with no loose fittings. Checks that visibility is not impaired due to dirty mirrors. Stop Arm/Safety Arm If equipped, check the stop arm to see that it is mounted securely to the frame of the vehicle. Also, check for loose fittings and damage. Checks that stop arm extends fully when operated Passenger Entry/Lift Check that the entry door is not damaged, operates smoothly, and closes securely from the inside. Hand rails are secure and the step light is working, if equipped. The entry steps must be clear with the treads not loose or worn excessively. If equipped with a handicap lift, look for leaking, damaged, or missing parts and explain how lift should be checked for correct operation. Lift must be fully retracted and latched securely. Emergency Exit Demonstrate that at least one emergency exit is not damaged, operates smoothly, and closes securely from the inside. Check that release handle can be operated properly from both inside and outside the vehicle. Point out and describe how all other emergency exits operate Check that any emergency exit warning devices are working properly. Seating Look for broken seat frames and check that seat frames are firmly attached to the floor. Check that seat cushions are attached securely to the seat frames.

Trailer (11.4)

Trailer Front (11.4.1)

Air/Electrical Connections Check that trailer air connectors are sealed and in good condition. Make sure glad hands are locked in place, free of damage or air leaks. Make sure the trailer electrical plug is firmly seated and locked in place. Header Board If equipped, check the header board to see that it is secure, free of damage, and strong enough to contain cargo. If equipped, the canvas or tarp carrier must be mounted and fastened securely. On enclosed trailers, check the front area for signs of damage such as cracks, bulges, or holes.

Side of Trailer 11.4.2)

Landing Gear Check that the landing gear is fully raised, has no missing parts, crank handle is secure, and the support frame and landing pads are not damaged. If power operated, check for air or hydraulic leaks. Doors/Ties/Lifts If equipped, check that doors are not damaged. Check that doors open, close, and latch properly from the outside. Check that ties, straps, chains, and binders are secure. If equipped with a cargo lift, look for leaking, damaged or missing parts and explain how it should be checked for correct operation. Lift should be fully retracted and latched securely. Frame Look for cracks, broken welds, holes or other damage to the frame, cross members, box, and floor. Tandem Release Arm/Locking Pins If equipped, make sure the locking pins are locked in place and release arm is secured.

Remainder of Trailer (11.4.3)

Remainder of Trailer Please refer to Section 11.2 of this manual for detailed inspection procedures regarding the following components: Wheels. Suspension system. Brakes. Doors/ties/lift. Splash guards.

Coach/Transit Bus (11.5)

Passenger Items (11.5.1)

Passenger Entry/Lift Check that entry doors operate smoothly and close securely from the inside. Check that hand rails are secure and, if equipped, that the step light(s) are working. Check that the entry steps are clear, with the treads not loose or worn excessively. If equipped with a handicap lift, look for any leaking, damaged or missing part, and explain how it should be checked for correct operation. Lift should be fully retracted and latched securely. Emergency Exits Make sure that all emergency exits are not damaged, operate smoothly, and close securely from the inside. Check that any emergency exit warning devices are working. Passenger Seating Look for broken seat frames and check that seat frames are firmly attached to the floor. Check that seat cushions are attached securely to the seat frames.

Entry/Exit (11.5.2)

Doors/Mirrors Check that entry/exit doors are not damaged and operate smoothly from the outside. Hinges should be secure with seals intact. Make sure that the passenger exit mirrors and all external mirrors and mirror brackets are not damaged and are mounted securely with no loose fittings.

External Inspection of Coach/Transit Bus (11.5.3)

Level/Air Leaks See that the vehicle is sitting level (front and rear), and if air-equipped, check for audible air leaks from the suspension system. Fuel Tank(s) See that fuel tank(s) are secure with no leaks from tank(s) or lines. Baggage Compartments Check that baggage and all other exterior compartment doors are not damaged, operate properly, and latch securely. Battery/Box Wherever located, see that battery(s) are secure, connections are tight, and cell caps are present. Battery connections should not show signs of excessive corrosion. Check that battery box and cover or door is not damaged and is secure.

Remainder of Coach/Transit Bus (11.5.4)

Remainder of Vehicle Please refer to Section 11.2 of this manual for detailed inspection procedures for the remainder of the vehicle. Remember, the Vehicle Inspection must be passed before you can proceed to the Basic Control Skills test.

Taking the CDL Vehicle Inspection Test (11.6)

Class A Vehicle Inspection Test (11.6.1)

If you are applying for a Class A CDL, you will be required to perform one of the four versions of a Vehicle inspection in the vehicle you have brought with you for testing. Each of the four tests are equivalent and you will not know which test you will take until just before the testing begins. All of the tests include an engine start, an in-cab�inspection, and an inspection of the coupling system. Then, your test may require an inspection of the entire vehicle or only a portion of the vehicle which your CDL Examiner will explain to you.

Class B and C Vehicle Inspection Test (11.6.2)

If you are applying for a Class B CDL, you will be required to perform one of the three versions of a Vehicle inspection in the vehicle you have brought with you for testing. Each of the three tests are equivalent and you will not know which test you will take until just before the testing begins. All of the tests include an engine start and an in�cab inspection. Then, your test may require an inspection of the entire vehicle or only a portion of the vehicle which your CDL Examiner will explain to you. You will also have to inspect any special features of your vehicle (e.g, school or transit bus).